Basic configuration on the router, so in this article, I will show you step by step how is router work, and the process of communication between PC in the Network.

As follow network topology need to assign IP address on each interface of router G0/0 and G0/1

Step 1: On Router Interface Configuration Gi0/0 and G0/2

Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#int gi0/0
R1(config-if)#ip address
R1(config-if)#no sh
R1(config-if)#int g0/1
R1(config-if)#ip address
R1(config-if)#no sh

Step 2: On PC interface Interface Configuration PC1, PC2, PC3 and PC4

IP addresss on PC1
IP address on PC4

Step 3: Verify connection between PC1 to PC4 (ping

Ping connection was sucessfull

By Admin