This lab will test your ability to configure basic settings on a Cisco switch.

  1. Use the local laptop to connect to the switch console.
  2. Configure Switch hostname as LOCAL-SWITCH
  3. Configure the message of the day as ” Violators will be prosecuted to the full extent of the law ” to warn the unauthorized user access devices.
  4. Configure the password for privileged mode access as “cisco”. The password must be md5 encrypted
  5. Configure password encryption on the switch using the global configuration command
  6. Configure CONSOLE access with the following settings :
  • Login enabled
  • Password: cisco
  • History size: 15 commands
  • Timeout: 6’45”
  • Synchronous logging

  1. Configure TELNET access with the following settings :
  • Login enabled
  • Password: ciscotelnet
  • History size: 15 commands
  • Timeout: 8’20”
  • Synchronous logging
  1. Configure the IP address of the switch as 192.168.1.2/24 and its default gateway IP (192.168.1.1).
  2. Test telnet connectivity from the Remote Laptop using the telnet client.

To download packet tracer software please check out Cisco Packet Tracer Software

Related post check out here: More article

By Admin