what is NAT? NAT stands for (Network Address Translation) NAT use for translate private IP address to public IP address on Router. There are three types of NAT such as Static NAT, Dynamic NAT, and PAT we also have known that NAT Overload.

This article will going to show you “How to configure NAT for basic Part 01”

I. All configuration on PC, Router, and Server

a. Configuration on PC01 and PC02

b. Configuration on R1-NAT Overload

R1(config)#int gi0/0
R1(config-if)#ip add 192.168.1.1 255.255.255.0
R1(config-if)#int s0/0/0
R1(config-if)#ip add 200.10.0.1 255.255.255.0
R1(config-if)#clock rate 64000
R1(config-if)#no shut

c. Configuration on R2-Static NAT

R2(config)#int s0/0/0
R2(config-if)#ip add 200.10.0.2 255.255.255.0
R2(config-if)#int gi0/0
R2(config-if)#ip add 10.0.0.1 255.0.0.0
R2(config-if)#no shut

d. Configure on Server 1

By Admin